← Back to Emergency Guides
This guide provides engineering priorities and awareness points only — it does not include detailed repair procedures or safety-critical instructions requiring on-site engineering judgement. For a specific situation, work through the resources below or request a technical assessment.
Immediate Engineering Priorities
1
Stop the affected equipment once a failure is suspected, rather than continuing to run it to "confirm" the problem.
2
Secure the area around the equipment, particularly where moving or rotating parts are involved.
3
Record what was observed before the stoppage — unusual noise, vibration, or behavior — and for how long it had been present.
4
Avoid disassembling the equipment before its as-found condition has been documented.
5
Engage a qualified engineer to measure and evaluate the condition before deciding on a repair approach.
Common Mistakes to Avoid
✗Continuing to run equipment with abnormal noise or vibration "until it fully fails."
✗Disassembling the equipment before photographing or documenting its condition.
✗Assuming the most obvious symptom is the root cause without investigation.
Evidence Preservation
✓Note when abnormal behavior was first noticed and how it changed over time.
✓Record any available vibration, temperature, or performance readings taken before the stoppage.
✓Photograph the equipment's as-found condition before any disassembly begins.
Related Engineering Resources
Next Step
